my-keyboard-keymaps/gmmk/pro/config.h

82 lines
2.2 KiB
C

/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define DEVICE_VER 0x0001
#define VENDOR_ID 0x320F
#define PRODUCT_ID 0x5044
#define MANUFACTURER Glorious
#define PRODUCT GMMK Pro
/* key matrix size */
#define MATRIX_ROWS 11
#define MATRIX_COLS 8
#define MATRIX_ROW_PINS \
{ B0, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10 }
#define MATRIX_COL_PINS \
{ A0, A1, A2, A3, A4, A8, A9, A10 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Hold ESC on start up to clear EEPROM and boot into bootloader mode */
#define BOOTMAGIC_LITE_ROW 1
#define BOOTMAGIC_LITE_COLUMN 3
#define TAP_CODE_DELAY 10
#define ENCODERS_PAD_A \
{ C15 }
#define ENCODERS_PAD_B \
{ C14 }
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* SPI Config for LED Driver */
#define SPI_DRIVER SPID1
#define SPI_SCK_PIN A5
#define SPI_MOSI_PIN A6
#define SPI_MISO_PIN A7
#define DRIVER_1_CS B13
#define DRIVER_2_CS B14
#define DRIVER_1_EN C13
#define DRIVER_2_EN C13
#define DRIVER_COUNT 2
/* 1000Hz USB polling - it's the default on stock firmware */
#define USB_POLLING_INTERVAL_MS 1
/* Send up to 4 key press events per scan */
#define QMK_KEYS_PER_SCAN 12
/* Set debounce time to 5ms */
#define DEBOUNCE 5
/* Force NKRO on boot up regardless of the setting saved in the EEPROM (uncomment to enable it) */
// #define FORCE_NKRO
//custom defins
#define RGB_MATRIX_KEYPRESSES